Testimonials
The SPIDR device is attractive to us at EOR for many reasons. For our St. John’s CO2/Helium project, the information we gather in the evaluation phase of the reservoir is valuable for future development plans going ...
- Jim Skurner, P.E.
|
Software
Using our free software the SPIDR is able to communicate with any PC. FlowCom is a full-featured communications tool for viewing real time data, downloading the SPIDR and processing the test data.
The Proprietary FlowCom software generates all of the plots needed for reservoir analysis, including Horner Plot, Ramey-type curve, Pressure-Derivative plot, Miller-Dyes Hutchinson plot, and AOF curves.
FlowCom can be installed on any desktop or laptop PC that is running a Windows 95 or newer operating system.Download the .ZIP file to a temporary directory, extract the file, and run the DRCSETUP.exe program to install FlowCom. For help with the installation or operation please contact us
FlowCom Software Download
Last Updated April 24, 2008
Flowcom Sample Data
FlowCom uses its own file format, any file with a .MK2 or .DLD extension can only be read by FlowCom. Below is a sample file of FlowCom data for you to browse with the FlowCom software download.
Sample.mk2 Download (0.15 MB)
Remote SPIDR
Communication Tool
Download
|
Manuals
Listed below are download links to important documents related to the SPIDR. The documents are in Microsoft Word format. Contact DRC with any questions about the manuals or difficulties downloading them.
FlowComSoftware Manual
SPIDR Operating Manual
DRC Well Test Forms
To convert a data file from wellhead to bottomhole pressure, DRC requires a variety of data to input into its model. The Well Test Data Sheet below outlines the necessary inputs for the conversion. Simply download, complete and return it to DRC. If there are any questions, please contact DRC.
Well Test Data Input Sheet
In addition, there are many cases when it is possible to satisfy MMS testing without running downhole gauges. Fill out the departure form below and submit it to the MMS prior to testing. To find out if your well is a candidate for surface testing to satisfy MMS requirements, please contact DRC.
MMS Departure Form
|
|
|
|
